In the Linux kernel, the following vulnerability has been resolved: soc/tegra: cbb: Fix cross-fabric target timeout lookup When a fabric receives an error interrupt, the error may have occurred on a different fabric. The target timeout lookup was using the wrong base address (cbb->regs) with offsets from a different fabric's target map, causing a kernel page fault. Unable to handle kernel paging request at virtual address ffff80000954cc00 pc : tegra234_cbb_get_tmo_slv+0xc/0x28 Call trace: tegra234_cbb_get_tmo_slv+0xc/0x28 print_err_notifier+0x6c0/0x7d0 tegra234_cbb_isr+0xe4/0x1b4 Add tegra234_cbb_get_fabric() to look up the correct fabric device using fab_id, and use its base address for accessing target timeout registers.

In the Linux kernel, the following vulnerability has been resolved: scsi: sg: Resolve soft lockup issue when opening /dev/sgX The parameter def_reserved_size defines the default buffer size reserved for each Sg_fd and should be restricted to a range between 0 and 1,048,576 (see https://tldp.org/HOWTO/SCSI-Generic-HOWTO/proc.html). Although the function sg_proc_write_dressz enforces this limit, it is possible to bypass it by directly modifying the module parameter as shown below, which then causes a soft lockup: echo -1 > /sys/module/sg/parameters/def_reserved_size exec 4<> /dev/sg0 watchdog: BUG: soft lockup - CPU#5 stuck for 26 seconds! [bash:537] Modules loaded: CPU: 5 UID: 0 PID: 537 Command: bash, kernel version 6.19.0-rc3+ #134, PREEMPT disabled Hardware: QEMU Standard PC (i440FX + PIIX, 1996), BIOS version 1.16.1-2.fc37 dated 04/01/2014 ... Call Trace: sg_build_reserve+0x5c/0xa0 sg_add_sfp+0x168/0x270 sg_open+0x16e/0x340 chrdev_open+0xbe/0x230 do_dentry_open+0x175/0x480 vfs_open+0x34/0xf0 do_open+0x265/0x3d0 path_openat+0x110/0x290 do_filp_open+0xc3/0x170 do_sys_openat2+0x71/0xe0 __x64_sys_openat+0x6d/0xa0 do_syscall_64+0x62/0x310 entry_SYSCALL_64_after_hwframe+0x76/0x7e The fix is to use module_param_cb to validate and reject invalid values assigned to def_reserved_size.

A flaw in Node.js TLS hostname handling can cause Node.js unicode dot separator handling can lead to tls wildcard-depth authentication bypass due to resolver and verifier hostname normalization mismat. This can lead to confidentiality impact or bypass of the intended security boundary under affected configurations. This vulnerability affects all supported release lines: **Node.js 22**, **Node.js 24**, and **Node.js 26**.

In the Linux kernel, the following vulnerability has been resolved: iommu: Fix NULL group->domain dereference in pci_dev_reset_iommu_done() Local sashiko review pointed it out that group->domain could be NULL when a default domain fails to allocate during the first probe, which can crash at domain->ops->attach_dev dereference in __iommu_attach_device() invoked by pci_dev_reset_iommu_done(). pci_dev_reset_iommu_prepare() is fine as an old_domain pointer can be NULL. Skip the re-attach in pci_dev_reset_iommu_done() to fix the bug.

A flaw in Node.js proxy tunnel error handling could expose proxy credentials in `ERR_PROXY_TUNNEL` error messages. When proxy credentials are embedded in the proxy URL, they may be exposed through error handling paths and captured by logs, diagnostics, or other error consumers. This vulnerability affects all supported release lines: **Node.js 22**, **Node.js 24**, and **Node.js 26**.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Avoid NULL pointer dereference or refcount corruption Commit 60f030f7418d ("iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE") fixed a NULL pointer dereference in an unlikely situation partly. If dev_pasid is not found in the dev_pasids list, it remains NULL. However, the teardown operations are executed unconditionally, this lead to a NULL pointer dereference or refcount corruption. If the domain was never attached to this IOMMU, info will be NULL, which would cause an immediate dereference when checking --info->refcnt. Even if info is not NULL, decrementing the refcount without having removed a valid PASID might unbalance the count. This could lead to premature dropping of the refcount to 0, potentially causing a use-after-free for the remaining active devices sharing the domain. Fix it by returning early if dev_pasid is NULL, before executing the teardown operations. Issue found by AI review and suggested by Kevin Tian. https://sashiko.dev/#/patchset/20260421031347.1408890-1-zhenzhong.duan%40intel.com

In the Linux kernel, the following vulnerability has been resolved: power: supply: max77705: Free allocated workqueue and fix removal order Use devm interface for allocating workqueue to fix two bugs at the same time: 1. Driver leaks the memory on remove(), because the workqueue is not destroyed. 2. Driver allocates workqueue and then registers interrupt handlers with devm interface. This means that probe error paths will not use a reversed order, but first destroy the workqueue and then, via devm release handlers, free the interrupt. The interrupt handler schedules work on this exact workqueue, thus if interrupt is hit in this short time window - after destroying workqueue, but before devm() frees the interrupt - the schedulled work will lead to use of freed memory. Change is not equivalent in the workqueue itself: use non-legacy API which does not set (__WQ_LEGACY | WQ_MEM_RECLAIM). The workqueue is used to update power supply (power_supply_changed()) status, thus there is no point to run it for memory reclaim. Note that dev_name() is not directly used in second argument to prevent possible unlikely parsing any "%" character in device name as format.

A flaw in Node.js HTTP/2 client allows a server to send an unlimited number of ORIGIN frames, which could lead to an Out of Memory error on the client. This vulnerability affects all supported release lines: **Node.js 22**, **Node.js 24**, and **Node.js 26**.

In the Linux kernel, the following vulnerability has been resolved: io_uring/napi: cap busy_poll_to 10 msec Currently there's no cap on the maximum amount of time that napi is allowed to poll if no events are found, which can lead to kernel complaints on a task being stuck as there's no conditional rescheduling done within that loop. Just cap it to 10 msec in total, that's already way above any kind of sane value that will reap any benefits, yet low enough that it's nowhere near being able to trigger preemption complaints.

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Bounds-check devid in __rlookup_amd_iommu() iommu_device_register() walks every device on the PCI bus via bus_for_each_dev() and calls amd_iommu_probe_device() for each. The inlined check_device() path computes the device's sbdf, calls rlookup_amd_iommu() to find the owning IOMMU, and only afterwards verifies devid <= pci_seg->last_bdf. __rlookup_amd_iommu() indexes rlookup_table[devid] with no bounds check of its own, so for a PCI device whose BDF is not described by the IVRS, the lookup reads past the end of the allocation before the caller's bounds check can run. This was harmless before commit e874c666b15b ("iommu/amd: Change rlookup, irq_lookup, and alias to use kvalloc()"): the table was a zeroed page-order allocation, so the over-read returned NULL and the caller's NULL check skipped the device. After that commit the table is a tight kvcalloc() and the over-read returns adjacent slab contents, which check_device() then dereferences as a struct amd_iommu *, causing a boot-time GPF. Seen on Google Compute Engine ct6e VMs, where the virtualized IVRS describes only the four TPU endpoints 00:04.0-07.0; the gVNIC at 00:08.0 (devid 0x40) indexes 56 bytes past the 456-byte allocation, into the adjacent kmalloc-512 slab object: pci 0000:00:04.0: Adding to iommu group 0 pci 0000:00:05.0: Adding to iommu group 1 pci 0000:00:06.0: Adding to iommu group 2 pci 0000:00:07.0: Adding to iommu group 3 Oops: general protection fault, probably for non-canonical address 0x3a64695f78746382: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.22 #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/06/2025 RIP: 0010:amd_iommu_probe_device+0x54/0x3a0 Call Trace: __iommu_probe_device+0x107/0x520 probe_iommu_group+0x29/0x50 bus_for_each_dev+0x7e/0xe0 iommu_device_register+0xc9/0x240 iommu_go_to_state+0x9c0/0x1c60 amd_iommu_init+0x14/0x40 pci_iommu_init+0x16/0x60 do_one_initcall+0x47/0x2f0 Guard the array access in __rlookup_amd_iommu(). With the fix applied on 6.18.22, the gVNIC at 00:08.0 is skipped cleanly and the VM boots.