In the Linux kernel, the following vulnerability has been resolved: 9p: avoid putting oldfid in p9_client_walk() error path When p9_client_walk() is called with clone set to false, fid aliases oldfid. If the walk subsequently fails after the request has been sent, the error path jumps to clunk_fid, which currently calls p9_fid_put(fid) unconditionally. This drops a reference to oldfid even though ownership of oldfid remains with the caller. If this is the last reference, oldfid can be clunked and destroyed while the caller still expects it to be valid. A later use or put of oldfid can then trigger a use-after-free or refcount underflow. Fix this by only putting fid in the clunk_fid error path when it does not alias oldfid, matching the existing guard in the error path below. This can be triggered when a multi-component walk is split into multiple p9_client_walk() calls and a later non-cloning walk fails. A reproducer and refcount warning logs are available on request.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: reject oversized group bitmap descriptors ocfs2_validate_gd_parent() only bounds bg_bits against the parent allocator's chain geometry. A malicious descriptor can still claim a bg_size/bg_bits pair that exceeds the bitmap bytes that physically fit in the group descriptor block, so later bitmap scans and bit updates can run past bg_bitmap. Add a physical-cap check based on ocfs2_group_bitmap_size() for the parent allocator type and reject descriptors whose bg_size or bg_bits exceed that capacity. Keep the existing chain geometry check so both the on-disk bitmap layout and the allocator metadata must agree before the descriptor is used. Validation reproduced this kernel report: KASAN use-after-free in _find_next_bit+0x7f/0xc0 Read of size 8 Call trace: dump_stack_lvl+0x66/0xa0 (?:?) print_report+0xd0/0x630 (?:?) _find_next_bit+0x7f/0xc0 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x188/0x2f0 (?:?) kasan_report+0xe4/0x120 (?:?) ocfs2_find_max_contig_free_bits+0x35/0x70 (fs/ocfs2/suballoc.c:1375) ocfs2_block_group_set_bits+0x472/0x4b0 (fs/ocfs2/suballoc.c:1457) ocfs2_cluster_group_search+0x16b/0x440 (fs/ocfs2/suballoc.c:86) ocfs2_bg_discontig_fix_result+0x1ef/0x230 (fs/ocfs2/suballoc.c:1786) ocfs2_search_chain+0x8f8/0x10a0 (fs/ocfs2/suballoc.c:1886) get_page_from_freelist+0x70e/0x2370 (?:?) lock_release+0xc6/0x290 (?:?) do_raw_spin_unlock+0x9a/0x100 (?:?) kasan_unpoison+0x27/0x60 (?:?) __bfs+0x147/0x240 (?:?) get_page_from_freelist+0x83d/0x2370 (?:?) ocfs2_claim_suballoc_bits+0x38c/0xe70 (fs/ocfs2/suballoc.c:96) sched_domains_numa_masks_clear+0x70/0xd0 (?:?) check_irq_usage+0xe8/0xb70 (?:?) __ocfs2_claim_clusters+0x18d/0x4c0 (fs/ocfs2/suballoc.c:2497) check_path+0x24/0x50 (?:?) rcu_is_watching+0x20/0x50 (?:?) check_prev_add+0xfd/0xd00 (?:?) ocfs2_add_clusters_in_btree+0x17d/0x810 (fs/ocfs2/suballoc.c:?) __folio_batch_add_and_move+0x1f5/0x3d0 (?:?) ocfs2_add_inode_data+0xd9/0x120 (fs/ocfs2/suballoc.c:?) filemap_add_folio+0x105/0x1f0 (?:?) ocfs2_write_begin_nolock+0x29f7/0x2f80 (fs/ocfs2/suballoc.c:3043) ocfs2_read_inode_block+0xb5/0x110 (fs/ocfs2/suballoc.c:?) down_write+0xf5/0x180 (?:?) ocfs2_write_begin+0x180/0x240 (fs/ocfs2/suballoc.c:?) __mark_inode_dirty+0x758/0x9a0 (?:?) inode_to_bdi+0x41/0x90 (?:?) balance_dirty_pages_ratelimited_flags+0xf8/0x1d0 (?:?) generic_perform_write+0x252/0x440 (?:?) mnt_put_write_access_file+0x16/0x70 (?:?) file_update_time_flags+0xe4/0x200 (?:?) ocfs2_file_write_iter+0x80a/0x1320 (fs/ocfs2/suballoc.c:?) lock_acquire+0x184/0x2f0 (?:?) ksys_write+0xd2/0x170 (?:?) apparmor_file_permission+0xf5/0x310 (?:?) read_zero+0x8d/0x140 (?:?) lock_is_held_type+0x8f/0x100 (?:?)

libvips is a fast image processing library with low memory needs. On 32-bit systems in versions before and including 8.18.0, the `gifload` operation could incorrectly determine dimensions leading to an integer overflow. This has been patched in version 8.18.1.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out-of-bounds read in smb_check_perm_dacl() The permission-check ACE walk in smb_check_perm_dacl() validates the ACE header size and caps sid.num_subauth at SID_MAX_SUB_AUTHORITIES, but it never checks that ace->size is actually large enough to contain num_subauth sub-authorities before compare_sids() dereferences them. CIFS_SID_BASE_SIZE covers the SID header up to but excluding the sub_auth[] array, and offsetof(struct smb_ace, sid) is the ACE header, so the existing guards only guarantee the 8-byte SID base, i.e. zero sub-authorities. compare_sids() then reads ace->sid.sub_auth[i] for i < min(local_sid->num_subauth, ace->sid.num_subauth). The local comparison SIDs (sid_everyone, sid_unix_NFS_mode, and the id_to_sid() result) always have at least one sub-authority, and an attacker controls the ACE revision and authority bytes (which lie within the in-bounds SID base), so they can match one of those SIDs and force the sub_auth read. A crafted ACE with size == 16 and num_subauth >= 1 placed at the tail of the security descriptor therefore causes a heap out-of-bounds read of up to SID_MAX_SUB_AUTHORITIES * sizeof(__le32) bytes past the pntsd allocation. The security descriptor is loaded by ksmbd_vfs_get_sd_xattr() into a buffer sized exactly to the on-disk data (kzalloc(sd_size) in ndr_decode_v4_ntacl()), so the read lands past the allocation. The malformed descriptor can be stored verbatim via SMB2_SET_INFO (the DACL is not normalised before being written to the security.NTACL xattr) and the read fires on a subsequent SMB2_CREATE access check, making this reachable by an authenticated client on a share that uses ACL xattrs. Add the missing num_subauth-versus-ace_size check, mirroring the identical guards already present in the sibling parsers parse_dacl() and smb_inherit_dacl().

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix use-after-free in rawdata dedup loop aa_replace_profiles() walks ns->rawdata_list to dedup the incoming policy blob against entries already attached to existing profiles. Per the kernel-doc on struct aa_loaddata, list membership does not hold a reference: profiles hold pcount, and when the last pcount drops, do_ploaddata_rmfs() is queued on a workqueue that takes ns->lock and removes the entry. Between dropping the last pcount and the workqueue running, an entry remains on the list with pcount == 0. aa_get_profile_loaddata() is an unconditional kref_get() on pcount, so when the dedup loop hits such an entry, refcount hardening reports refcount_t: addition on 0; use-after-free. inside aa_replace_profiles(), and the poisoned counter then trips "saturated" and "underflow" warnings on the subsequent uses of the same loaddata. Before commit a0b7091c4de4 ("apparmor: fix race on rawdata dereference") the dedup path used a get_unless_zero-style helper on a single counter, so the existing "if (tmp)" guard was meaningful. The split-refcount refactor introduced aa_get_profile_loaddata(), which has plain kref_get() semantics, and the guard quietly became a no-op. Introduce aa_get_profile_loaddata_not0(), matching the existing _not0 convention used by aa_get_profile_not0(), and use it for the rawdata_list dedup lookup so dying entries are skipped. Reproduced on x86_64 with v7.1-rc5 in QEMU+KVM running Ubuntu 24.04 + stress-ng 0.17.06: stress-ng --apparmor 1 --klog-check --timeout 60s Without this patch the three refcount_t warnings fire within a few seconds. With it the same 60 s run is clean. Coverage is a smoke-test only; a longer soak with CONFIG_KASAN, CONFIG_KCSAN and CONFIG_PROVE_LOCKING would be welcome from anyone with the cycles.

In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: avoid double decrement of bla.num_requests The bla.num_requests is increased when no request_sent was in progress. And it is decremented in various places (announcement was received, backbone is purged, periodic work). But the check if the request_sent is actually set to a specific state and the atomic_dec/_inc are not safe because they are not atomic (TOCTOU) and multiple such code portions can run concurrently. At the same time, it is necessary to modify request_sent (state) and bla.num_requests atomically. Otherwise batadv_bla_send_request() might set request_sent to 1 and is interrupted. batadv_handle_announce() can then set request_sent back to 0 and decrement num_requests before batadv_bla_send_request() incremented it. The two operations must therefore be locked. And since state (request_sent) and wait_periods are only accessed inside this lock, they can be converted to simpler datatypes. And to avoid that the bla.num_requests is touched by a parallel running context with a valid backbone_gw reference after batadv_bla_purge_backbone_gw() ran, a third state "stopped" is required to correctly signal that a backbone_gw is in the state of being cleaned up.

Parsec is a cloud-based application for simple and cryptographically secure file sharing. The application does not sanitize the workspace name, creating a vulnerability if that workspace name is a UNC path. When creating mountpoint in the windows filesystem to mount the workspace of an organization, the application does not sanitize the workspace name. The cause issue if the workspace name evaluate to a UNC path since it's allowed for the name to containt `\` char. If the UNC path is invalid (or the targeted resource is not available) the application become unresponsive otherwise the system will interact with the mounted UNC path allowing the attacker to retrieve to [`NTLM`] hash.

In the Linux kernel, the following vulnerability has been resolved: net: team: fix NULL pointer dereference in team_xmit during mode change __team_change_mode() clears team->ops with memset() before restoring safe dummy handlers via team_adjust_ops(). A concurrent team_xmit() running under RCU on another CPU can read team->ops.transmit during this window and call a NULL function pointer, crashing the kernel. The race requires a mode change (CAP_NET_ADMIN) concurrent with transmit on the team device. BUG: kernel NULL pointer dereference, address: 0000000000000000 Oops: 0010 [#1] SMP KASAN NOPTI RIP: 0010:0x0 Call Trace: team_xmit (drivers/net/team/team_core.c:1853) dev_hard_start_xmit (net/core/dev.c:3904) __dev_queue_xmit (net/core/dev.c:4871) packet_sendmsg (net/packet/af_packet.c:3109) __sys_sendto (net/socket.c:2265) The original code assumed that no ports means no traffic, so mode changes could freely memset()/memcpy() the ops. AF_PACKET with forced carrier breaks that assumption. Prevent the race instead of making it safe: replace memset()/memcpy() with per-field updates that never touch transmit or receive. Those two handlers are managed solely by team_adjust_ops(), which already installs dummies when tx_en_port_count == 0 (always true during mode change since no ports are present). WRITE_ONCE/READ_ONCE prevent store/load tearing on the handler pointers. synchronize_net() before exit_op() drains in-flight readers that may still reference old mode state from before port removal switched the handlers to dummies.

Dancer2 versions through 2.1.0 for Perl generate insecure session ids when CSPRNG modules are unavailable. Dancer2::Core::Role::SessionFactory::generate_id silently falls back to a built-in rand-derived session id when both Math::Random::ISAAC::XS and Crypt::URandom are unavailable. The fallback session id is generated from a SHA-1 hash of a call to the built-in rand function, the absolute path of the Dancer2::Core::Role::SessionFactory module, an internal counter, the process id, the module instance memory address, and a shuffled string of characters (using the List::Util::shuffle function, which also uses the built-in rand function). These are all low-entropy and easily guessed sources. The built-in rand() function is seeded with 32-bits and considered unsuitable for security applications. Predictable session ids could allow an attacker to gain access to systems.

Crypt::Password versions through 0.28 for Perl generate insecure random values for salts. These versions use the built-in rand function, which is predictable and unsuitable for cryptography.